Vega-Absolute Ltd

LoRaWAN® modem GM-2 is designed to take readings from Elster gas meters, with the subsequent accumulation and transfer of this information to the LoRaWAN® network.
The modem is equipped with Hall sensors, one of which calculates the current meter readings and the other is located in such a way and has a sensitivity level that reacts only to the presence of an external magnetic field (for example, when a strong magnet is placed near the gas meter to disable the counting mechanism).
To protect against unauthorized access, the modem has a tamper. There are also two security inputs and two open-drain outputs for control of an external devices.
The modem is powered by a 3400 mAh soldered battery with up to 10 years life up. The modem acts as a LoRaWAN® device of class A.

Vega M410 off-line tracking device is designed to track a protected object by means of automatically sent messages with the movement and stop points of the object in case unauthorized movement is detected, or should the object leave the specified zone, or by the request of the owner.

A protected object means any personal property that is valuable to its owner:

• Vehicles - cars, motorcycles, bicycles, boats, yachts, etc.
• Animals – pets, domestic and breed animals, etc.
• Construction machinery - cranes, trucks, etc.
• Containers, coaches and wagons, baggage suitcases, etc.

The tracking device is able of long off-line operation with high level of security, does not require external connections. Being in sleep mode most of time, the device is difficult to detect visually or with radio scanners. The device sends information to the owner one to three times per day and waits for commands for 5 minutes, then switches back to sleep mode

Vega MT X CAN device is designed for monitoring of vehicles by the using of GLONASS/GPS positioning systems including the determination of vehicle placement, speed and motion direction as well as for transmitting of collected data through GSM.

Vega MT X have the built-in processor with a CAN-processor functionality and supports up to three CAN-buses that allows to get a full information about vehicle.

Non-volatile memory allows to store information about events and statuses of the device in the absence of power supply.

Collected data transmits through GPRS technology on the dedicated server which from that data may be get through a special program for latest analysis and processing on the dispatcher console. Support of several servers allows to send information about vehicle status on the four servers simultaneously.

Setting of the device and firmware updating may be carried out through USB-port or by the air with Configurator application.

The vehicle route is recorded as individual points in time (track). Along with the track, information is recorded coming into the device from internal and external sensors, as well as from an additional equipment. The block has a flexible setting for the period of saving track points: by the time (set in seconds), by the distance (in meters), by the course change (in degrees). The readings of all sensors and the statuses of the device can also be transmitted with different events: by the time, by the parameter changing, or along with the track.

The Vega NB-13 modem is designed for collecting data from interfaces RS-232/RS-485 and 1-Wire, with subsequent accumulation and transfer of this information to the GSM network through NB-IoT technology. Although RS-232 and RS-485 have contacts it cannot operating at the same time. Choosing is carried out on software level while device setting.
The Vega NB-13 has an external NB-IoT antenna and a degree of enclosure protection IP65. Also the modem has an output 8 V for the powering of an external devices.
The modem can be used for any utilities’ meters and industrial equipment with RS-232/RS485 or 1-Wire interface.
Also, Vega NB-13 can be used as a security sensor, there are two additional security inputs and a Hall sensor.

Vega Smart-UM0101 sensor combines a several functions: control of temperature, humidity parameters of the environment, CO2 level, noise and ambient light level with the ability to set thresholds of these ones. Sensor's base can be mounted on a flat surface and then main sensor module is attached to the base. The device have a removal sensor. Every time alarm event occur, information message will send to LoRaWAN® network.Vega Smart-UM0101 can be used to control labor circumstances in office and manufacture spaces, as well as Smart Home systems, built on LoRaWAN® technology. CO2 sensor may be installed on the board or not in depend on the order conditions.