New ARM-Based Embedded Module Series for reliable communication in IoT Networks
The powerful all-in-one bus nodes UNIGATE IC2 are based on the ARM Cortex-M4 processor technology and thus offer a significant performance leap compared to the proven UNIGATE IC series from Deutschmann. The ready-to-use UNIGATE IC2 module provides reliable e.g. Modbus TCP connectivity and can be quickly and easily installed in a terminal device or sensor system. This means that development costs and market introduction of network-compatible products can be significantly optimized.
Protocol connection of the UNIGATE IC2 module to the terminal device is implemented flexibly by script programming with the free Protocol Developer tool from Deutschmann Automation. With the UNIGATE IC2 embedded series, the script execution time can be reduced by a factor of 50 to 80, depending on the commands used, compared to predecessor products. With simple scripts, execution times in the microsecond range are possible. UNIGATE IC2 modules are also able to process large scripts very quickly.
Compared to UNIGATE IC, the fast UNIGATE IC2 embedded series achieves much higher transfer rates for communication via SPI or UART. The SPI bus currently achieves a transfer rate of 12 Mbit/s in master mode, 33 Mbit/s are being tested. In slave mode, 10 Mbit/s are achieved. The UART interface supports baud rates of up to 7.5 Mbaud.
The powerful UNIGATE IC2 series is pin-compatible with the widely used UNIGATE IC embedded solutions from Deutschmann, which continue to be available and are supported. The scope of performance of the firmware is identical and existing scripts for protocol connection of the all-in-one bus nodes can still be used. Under certain circumstances, minor adjustments may be necessary due to the changed timing.
UNIGATE IC2 is already available for Fast Ethernet, Modbus TCP and PROFIBUS. The EtherCATversion will be presented during embedded world, PROFINET will follow next.