ROHDE & SCHWARZ GmbH & Co. KG

Key Facts

• HMP4030: 3 × 0 V to 32 V/0 A to 10 A (384 W)
• HMP4040: 4 × 0 V to 32 V/0 A to 10 A (384 W)
• Low residual ripple due to linear postregulators
• Realtime voltage, current and power values
• High setting and readback resolution: 1 mV and 0.1/0.2/1.0 A (depending on current and model)
• FuseLink (electronic fuse) freely combinable for all channels
• FuseDelay tunable up to 250 ms
• EasyArb function directly programmable on device
• PC software (free of charge) for easy generation of user-defined waveforms
• Independently adjustable overvoltage protection (OVP) for each channel
• Advanced parallel and serial operation via V/I tracking
• Front connectors: 4 mm (0.16 in) safety sockets
• Rear connectors for all channels, including sense
• USB/RS-232 dual interface, remote control via SCPI-based commands

High sensitivity, multifunctionality and a great price – that is what makes the R&S^®HMO1002 digital oscilloscope so special. From embedded developers to service technicians to educators – with its wide range of functions, the R&S^®HMO1002 addresses a broad group of users. Advanced, powerful technology in a fanless design meets the high requirements of today's customers. The R&S^®HMO1002 digital oscilloscope includes a wide range of upgrade options, providing true investment protection for the future.

The R&S^®HMO1002 digital oscilloscope from the Rohde & Schwarz Value Instruments product range features a high waveform update rate and high vertical sensitivity, and is available with bandwidths of 50 MHz, 70 MHz and 100 MHz. The fanless instrument offers a sampling rate of 1 Gsample/s and a memory depth of 1 Msample.

Like all R&S^®HMOx oscilloscopes, the R&S^®HMO1002 includes the mixed signal function as standard. The separately available R&S^®HO3508 logic probe is not coupled to a specific instrument and can be used with all R&S^®HMO oscilloscopes.

For communications between embedded systems and the environment, the R&S^®HMO1002 includes hardware-based signal triggering and decoding for all common protocols (I²C, SPI, UART, CAN and LIN). This option can be activated with an upgrade voucher at any time.

The integrated pattern generator for generating protocol messages at up to 50 Mbit/s is ideal for embedded users. In addition to using predefined messages, developers can program their own signal patterns for supported serial protocols

The integrated three-digit digital voltmeter enables service technicians to simultaneously perform voltage measurements on both analog channels with two values each.

The function generator that generates different types of signals with frequencies up to 50 kHz is useful in educational settings. Trainees and students can use the R&S^®HMO1002 to learn basic measurement tasks. In education mode, the convenience functions can be switched off.

Thanks to 128k test points and analysis functions in the frequency domain, the R&S^®HMO1002 keeps pace with significantly larger oscilloscopes. The time domain signal, measurement window, FFT analysis range and measurement result are displayed on a single screen, which makes it easier to measure the spectra.

The R&S^®HMO1002 offers time domain, logic, protocol and frequency analysis in a single instrument and is a member of the Rohde & Schwarz family of scope-of-the-art oscilloscopes.

Key Facts

• 1 Gsample/s sampling rate, 1 Msample memory depth
• High vertical sensitivity down to 1 mV/div
• High acquisition rate to identify signal faults
• Mixed signal function as standard
• Serial bus analysis: hardware-based triggering and decoding
• The right signal at hand: pattern generator up to 50 Mbit/s and function generator up to 50 kHz
• Voltmeter measurements using an oscilloscope
• Wide selection of automatic measurement functions
• QuickView: key results at the push of a button
• FFT: the easy way to analyze the signal spectrum

When debugging embedded devices in the lab or analyzing complex problems in the field, the R&S^®Scope Rider offers the performance and capabilities of a lab oscilloscope as well as the form factor and ruggedness of a battery-operated handheld device.

Key Facts

• 60 MHz to 500 MHz with 5 Gsample/s sampling rate
• Isolated channels with CAT IV 600 V / CAT III 1000 V rating
• 10-bit ADC
• 50 000 waveforms per second
• Capacitive touch and keypad operation
• 5 in 1: Lab performance oscilloscope, logic analyzer, protocol analyzer, data logger and digital multimeter
• IP51 housing meeting military environmental requirements
• Wireless LAN and Ethernet for web-based remote control and quick data access

Power of ten (10-bit ADC, 10 Msample memory and 10.1" touchscreen) combined with smart operating concepts make the R&S®RTB2000 digital oscilloscope the perfect tool for university laboratories, for troubleshooting embedded designs during development and for production and service departments.

The largest display (10.1") with the highest resolution of 1280 × 800 pixel in its class, a capacitive touchscreen to quickly navigate in pop-up menus and a touch function to easily adjust scaling, to zoom in or to move a waveform – works just like your smartphone.

The 10-bit A/D converter yields up to a four-fold improve­ment compared to conventional 8-bit A/D converters. You get sharper waveforms with more signal details.

10 Msample memory depth is available on each channel if all channels are active. When interleaved, 20 Msample are available. That is 10 times more than conventional oscil­loscopes offer. This captures longer signal sequences for more analysis results.

R&S^®RTO oscilloscopes combine excellent signal fidelity, up to 16 bit resolution and high acquisition rates with a compact device format in the 600 MHz to 4 GHz class.

Key Facts

• 600 MHz to 4 GHz bandwidths
• 2 or 4 channels
• Up to 16-bit vertical resolution
• 1.000.000 waveforms/s
• Up to 20 Gsample/s