Odenwälder Kunststoffwerke Gehäusesysteme GmbH

The optimum connection

The new CONNECT is ideal for wired applications.

• two enclosure shells, convex and flattened with a recessed panel
• the two shells snap into each other, no screws required, this saves time during assembly, and you can also choose the front side of the device
• cutouts at both ends; to complete the enclosure, end parts and/or cable glands can be fitted
• three enclosure lengths
• the enclosure shells and the end parts are made of UV-stabilised V-0 material
• integrated strain relief with the cable gland kit
• enough room for the installation of compact displays, LEDs and USB connectors
• recessed surface to protect the membrane keyboard, decor foil or label 
• attachment pillars for PCBs and components in the flat enclosure shell 
• holding clamps for round tubes up to ø 32 mm available as accessories (for enclosure lenghts 116 and 156 mm)

Compact handheld enclosures

The new DATEC-COMPACT series of handheld enclosures has a compact and robust design, ideally suited for mobile devices.

• robust, high-quality material ASA+PC-FR for outdoor use
• high protection class up to IP 65
• 3 sizes, 2 colours
• all-in solution for charging, with integrated contacts
• with / without battery compartment for 1.5 V AAA or AA batteries;
  three battery cells guarantee reliable 3V power supply
• SD cards/USB connectors can be inserted within the sealed compartment (versions with battery compartment) 
• station for easy data and charging current transmission available as accessories
• screw connection with stainless steel screws and Torx drive
• further accessories: set of battery clips and gold-plated contacts

Multifunction electronic enclosures

Highly innovative modular enclosures system which can be configured to meet all the requirements of today’s man-machine interfaces.

• aesthetic and ergonomic design
• uniquely, the operator can decide to use the electronics as a mobile or as a stationary unit
• plenty of space for operating elements, graphic displays and touch screens  (S: 6.4"/16 cm, M: 8.4"/21 cm, L: 10.4"/26 cm)
• available with either flat or high bottom part for individual installation configurations, interfaces, cable inputs and outputs etc.
• optional front panel styles: ABS cover and flat panel, aluminium front panel and glass panel for touch screens 
  installation of tablets on demand 
• protection class IP 54 with sealing gaskets (accessory)
• internal fastening pillars for PCBs and components
• ordered as individual components for multiple configurations:
• mobile (1)
  with/without battery compartment (5 x AA), accessible from the outside, incl. protection against incorrect insertion as well as anti-rotation device; user-friendly design with attractive flat styling in the handle area; finger recesses on the underside ensure a secure grip
• enclosures with base or flat wall suspension element (2)
  for data transmission and charging the enclosure snaps into base or flat wall suspension element; contacts available as accessories; operating panel can be mounted either vertically or horizontally; the ergonomically inclined base offers plenty of space for electronics
• desk-top screwed (3)
  operating panel inclined by 20° whether vertically or horizontally mounted; hidden screw fixing; the ergonomically inclined base offers plenty of space for connectors and cable glands; rubber feet supplied with the case ensures non-slip desktop positioning
• desk-top/wall mounting, secured  by latch lock (4)
  unique interface between a stationary and a mobile component; simplified assembly by snap-in interfaces; the ergonomically inclined base offers plenty of space for plug connectors, electronics as well as wiring; base freely accessible; direct wall mounting of the base; mobile unit can be mounted either vertically or horizontally
• installation enclosures (5)
  if the architectural standards are particularly high, i.e. in historically buildings, INTERFACE-TERMINAL enclosures can also be harmoniously integrated in walls or front panels; installation in plant and machinery is also possible; easy wall installation with installation assembly kit; our speciality: enclosures and design frames in individual colours and designs e.g. wood finish.

Wall mount enclosures for control units

The new NET-BOX with stylish curved top section is a modern and elegant housing for wall mounted control units, network nodes and much more.

• three sizes with plenty of room for electronics and interfaces
• the connectors and cables are hidden under the front lid
• the cases are moulded in flame retardant material and can be sealed to IP 65 for outdoor applications
• simple three part assembly - bottom part, front cover and front lid; there are no visible screws on the front, just two on the underside of the lid
• screw pillars are provided in the bottom part for mounting PCBs and assemblies
• optional infill covers close the underside opening and can be used for fitting additional PCBs or assemblies
• three point wall mounting system - no need to open the main electronics section, only the front lid has be refitted after installation
• supplied with anti-tamper Torx T10 assembly screws
• NET-BOX cases can also be used as desktop units, accessory non-slip feet are available

Harmonious blend of materials

The new SYNERGY combines the advantages of plastic and aluminium in one single enclosure concept:

• a modern range of enclosures in 4 basic geometrical shapes – square, rectangular, circular and oval *** iF product design award ***
• 36 enclosure sizes, with plenty of room for the electronics and operating elements
• screw connection with stainless steel screws and Torx drive
• colour combination:  Aluminium, anodised in silver / plastic parts black
• plenty of space for interfaces, no inclined surfaces, easy assembly
• recessed surface in the top part for decor foils or membrane keyboards
• bottom part with opening and screw-down cover: practical for the use of a battery compartment or for access to the interior, e.g. for a memory card or batteries that are mounted directly on the PCB; battery compartment kit, battery clips for mounting on PCBs and button cell holder as accessories
• cable outlet in the bottom part (extra-flat network cable, round cable up to ø 4 mm)
• battery compartment kit, wall suspension element and extender (for increasing the height of the domes) as accessories
• individual enclosure solutions on request