14 - 16 March 2017 // Nuremberg, Germany

Posting print layout

What information should be shown in the print layout?

Create print layout
Zoom product LOGO_PCAN-Diag 2- Handheld CAN Bus Diagnostics Unit

PCAN-Diag 2- Handheld CAN Bus Diagnostics Unit

LOGO_PCAN-Diag 2- Handheld CAN Bus Diagnostics Unit

PCAN-Diag 2- Handheld CAN Bus Diagnostics Unit

Request information Request information

Contact us

Please enter your personal information and desired appointment. You can also leave us a message.

Your personal information

Your message for us

Desired appointment during the exhibition

* Compulsory fields you must fill in.
Your message has been sent.

Would you like to use more facilities and advantages of the platform? Then please log in – or register here.

An error has occurred.

PCAN-Diag 2 is a handheld diagnostics unit with a  wide range of functions to allow investigation of a CAN bus, such as detection of the CAN bit rate, bus load measurement, and termination measurement. As well as receiving CAN messages, it can transmit either individual messages or entire sequences of them. In addition, the internal memory card allows tracing and playback of the CAN traffic.

The integrated two-channel oscilloscope enables visualization of CAN signals. Single CAN IDs and various events can be  used as triggers. The CAN frames are decoded from the analog signal, for example, to detect errors in the frame.

Incoming CAN messages can be displayed as symbols for clear and easy allocation. The PCAN-Symbol Editor software supplied with this product enables convenient creation of the symbol files needed for this feature.

- High-speed CAN (ISO 11898-2), CAN transceiver module available on request for Low-speed CAN (ISO 11898-3) or Single-wire CAN (SAE J2411)
- CAN connection is D-Sub, 9-pin
- Power supply via batteries (4 x 1.5 V AA) or using supply unit provided (low-voltage socket on unit)
- Internal memory card (2 GB) for saving projects

Overview of functions
- Selection of the bit rate from a preset list or from 8 user-defined values
- Automatic bit rate detection based on a fixed value list
- Switchable listen-only mode
- Switchable silent startup function (listen-only mode at wrong bit rate)
- Symbolic display of incoming CAN messages using symbol files, taking into account enums (lists of values), multiplexers,  and ID ranges
- Recording of incoming CAN messages to the internal memory card
- Playback of trace files
- Transmitting individual CAN frames or CAN frame lists
- Decimal, hexadecimal, or binary entering of CAN data. Data change of a single transmission message during runtime
- Measurement of CAN bus load, displayed by means of a time diagram, switchable display of error frames
- Bus-load time diagrams can be saved as Bitmap screenshots
- Measurement of CAN termination for High-speed CAN bus, even while the system is running
- Switchable CAN termination for the connected bus, depending on the transceiver module used
- Voltage measurement for all pins of the CAN connector (D-Sub)
- Management of device configuration, transmit lists, symbol files, and all recorded data (screenshots, trace, and CSV files) in projects
- Optional auto-reset on bus off error

Oscilloscope functions
- Oscilloscope with two independent measurement channels, each with a maximum sample rate of 20 MHz
- Display of the CAN-High and the CAN-Low signals as well as the difference of both signals
- Inspection of external signals (with frequencies up to 1 MHz) with a probe via the BNC connection
- Trigger configuration to frame start, frame end, CAN errors, or individual CAN frames based on their CAN ID
- External measurement devices can be triggered using the BNC connector
- Depiction of raw CAN frames
- Decoding of CAN frames from the recorded signal trace
- Display of various properties and of measuring data of the decoded CAN frame using the Report function
- Current view can be saved as a Bitmap screenshot
- Memory depth can be set to up to 64 kSamples
- Recorded sample data can be saved as a CSV file
- Extensive zoom functions
- Time measurement with a resolution of up to 50 ns

Scope of supply
- PCAN-Diag 2 in plastic casing
- Configuration software PCAN-Diag Editor for Windows®
- PCAN-Symbol Editor for Windows®
- Conversion software PEAK-Converter for Windows®
- Batteries (4 x 1.5 V AA)
- Micro USB connector cable
- Power supply unit with changeable plugs for Euro, U.S., and UK
- Documentation

Product Page: http://www.peak-system.com/quick/AEW-1E









PCAN-Diag 2- Handheld CAN Bus Diagnostics Unit is assigned to following product groups:

There are no entries in your notes.

Show notes


The selected entry has been placed in your notes!

If you register you can save your notes permanently and access all entries even when underway – via laptop or tablet.

You can register an account here to save your settings in the Exhibitors and Products Database and as well as in the Supporting Programme.The registration is not for the TicketShop and ExhibitorShop.

Register now

Your advantages at a glance:

  • Advantage Save your notes permanently. Use the instant access to exhibitors or products saved – mobile too, anytime and anywhere – incl. memo function.
  • Advantage The optional newsletter gives you regular up-to-date information about new exhibitors and products – matched to your interests.
  • Advantage Call up your notes mobile too! Simply log in and access them at anytime.