Wir möchten auf unserer Internetseite Dienste von Drittanbietern nutzen, die uns helfen, unsere Werbeangebote zu verbessern (Marketing), die Nutzungsweise unserer Internetseite auszuwerten (Performance) und die Internetseite an Ihre Vorlieben anzupassen (Funktional). Für den Einsatz dieser Dienste benötigen wir Ihre Einwilligung, welche jederzeit widerrufen werden kann. Informationen zu den Diensten und eine Widerspruchsmöglichkeit finden Sie unter „Benutzerdefiniert“. Weitergehende Informationen finden Sie in unserer Datenschutzerklärung.
PEmicro's Multilink ACP and Multilink Universal are development interfaces which allow a PC access to the Background Debug Mode (BDM) or JTAG interface on ARM devices from several manufacturers (Multilnk ACP) and also many different NXP MCU architectures (Multilink Universal). They connect between a USB port on a Windows machine and the standard debug connector on the target. Headers for the supported architectures are located under an easy access panel that flips open. Ribbon cables suitable for a variety of architectures are included.
By using the Multilink ACP or Multilink Universal debug probes, the user can take advantage of the background debug mode to halt normal processor execution and use a PC to control the processor. The user can then directly control the target’s execution, read/write registers and memory values, debug code on the processor, and program internal or external FLASH memory devices.
These Multilinks work with PEmicro's in-circuit debuggers and flash programmers to allow debug and flash programming of the target processor. For many of the supported processors, P&E has a set of interface libraries allowing the user to write their own Windows based application which interacts with PEmicro's debug interface. LPCXpresso, Kinetis Design Studio, S32 ARM and Power, Somnium, IAR, Cosmic, Codesourcery, Keil, Atollic, and CodeWarrior software all support the use of PEmicro's Multilink ACP and Multilink Universal to develop and debug with NXP's Kinetis ARM devices.
This interface is USB 2.0 compatible, and it is also backwards compatible with USB 1.1 ports.
USB interface from PC to Multilink allows for fast, easy programming and debugging -- with the ease and compatibility of the USB interface.
Draws power from USB interface-- no separate power supply required (draws less than 1mA from the target).
Target Voltage: 1.8V-5.25V
Target Frequency: 16Khz-50Mhz (applies to HCS08,RS08,CFV1, S12Z, or HCS12X only)
Compatible with Kinetis, HCS08, RS08, HC(S)12(X), S12Z, ColdFire V1/+V1, ColdFire V2-4, Qorivva MPC5xxx, DSC, STMicroelectronics' SPC56, and ARM devices from many manufacturers.
Pipelined programming algorithms for some Power Architecture families that dramatically increase programming speed.
ARM device support includes both the JTAG and SWD protocols
Includes USB cable, Type A Male to Type B Male, 6-ft.
Auto-frequency detection + trimming capabilities for HCS08 devices.
Auto-frequency detection for HC(S)12(X) devices.
Generates programming voltage on RESET line for RS08 devices.
ARM Cortex devices: (supported by Multilink Universal and Multilkink ACP)
Silicon Labs:EFM32, SiM3
Texas Instruments:LM3S, LM4, TM4C12x
Toshiba:TX00, TX03, & TX04
NXP 8-/16-/32-bit devices: (supported by Multilink Universal only)
Leider gibt es für diesen Aussteller kein deutsches Firmenprofil.
PEmicro is an industry trendsetter in Debug and ISP Programming tools for a wide variety of ARM® devices. Incorporated in 1982, PEmicro developed and marketed the first-of-its-kind general purpose programmer, with reconfigurable outputs to allow engineers to use a single tool to program memory from a wide variety of device manufacturers. Today, PEmicro continues this universal programming philosophy with its flagship products for both Advanced Debug and ISP Production Programming tools.
On the development side, PEmico’s Multilink debug probes support many advanced debug features including power measurement, real-time expressions view, SWO data capture, and printf capture. The tools are seamlessly integrated into a variety of popular 3rd party IDEs, as well as through an Eclipse-based plug-in which integrates these tools into any GDB-based Eclipse IDE.
For production, Pemicro's Cyclone ISP programmers are some of the fastest and most sophisticated and secure programming tools on the market. CYCLONE and CYCLONE FX series programmers can easily be automated, or operated manually in stand-alone mode to securely program target devices. CYCLONE FX programmers are PEmicro’s flagship Cyclones and offer several powerful and unique enhancements to memory size, programming speed, and data security.
PEmicro takes pride in its commitment to providing professional, cost-effective development tools and prompt, knowledgeable customer support. Over the years, we have been fortunate to build many great relationships that have contributed to the success of PEmicro and our partners. Although much has changed over the years, we have always practiced the same philosophy: a dedication to excellence in designing products that are both sophisticated and reliable to help make the complete development cycle faster and easier.